BTVFV - 16741 LOCK BOND CLEAR THIN SPREAD FLOOR TILE ADHESIVE
- MSDS: BTVFV
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: 16741 LOCK BOND CLEAR THIN SPREAD FLOOR TILE ADHESIVE
- National Stock Number: 8040-00F036095
Product Identification
Product ID:16741 LOCK BOND CLEAR THIN SPREAD FLOOR TILE ADHESIVE
MSDS Date:02/22/1991
FSC:8040
NIIN:00F036095
MSDS Number: BTVFV
Responsible Party
OKLAHOMA CITY, OK 73125-0188
US
Emergency Phone: 405-528-4411
Info Phone: 405-528-4411
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: <3.5%
OSHA PEL 260 MG/CUM
ACGIH TLV: 262 MG/CUM (SKIN)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
85 G/LITER
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPORS MAY CAUSE MILD
IRRITATION OF RESPIRATORY TRACT. SKIN: PROLONGED CONTACT MAY CAUSE
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH AREA W/SOAP &
WATER. INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH W/WATER FOR 15
MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TOC
Flash Point:SEE SUPP
Lower Limits:1
Upper Limits:7
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS IN POSITIVE
PRESSURE MODE & FULL PROTECTIVE GEAR SHOULD BE WORN.
Unusual Fire/Explosion Hazard:IRRITATING/TOXIC GASES & AEROSOLS MAY BE
PRODUCED DURING BURNING. BOILS W/O FLASHING.
Accidental Release
Spill Release Procedures:SCRAPE INTO CONTAINERS & DISPOSE OF. PROVIDE
ADEQUATE VENTILATION.
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES,
SPARKS/FLAME. STORE BETWEEN 40-120F. DON'T FREEZE. KEEP CONTAINER
CLOSED WHEN NOT IN USE.
Other Precautions:DON'T INGEST. KEEP AWAY FROM CHILDREN.
Exposure Controls
Ventilation:LOCAL EXHAUST: RECOMMENDED. DON'T USE IN CLOSED SPACES.
Protective Gloves:RECOMMENDED
Eye Protection:GLASSES
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
PRODUCT BOILS W/O FLASHING >200F.
Chemical Properties
Boiling Pt:B.P. Text:190-200F
Vapor Pres:96
Vapor Density:>1
Spec Gravity:0.98
Solubility in Water:COMPLETE
Appearance and Odor:CREAM COLORED PASTE W/SLIGHT AMMONIA ODOR
Percent Volatiles by Volume:50-52
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT SOURCES, SPARKS, FLAME, FREEZING
Hazardous Decomposition Products:CO, CO2, WATER, OXIDES OF NITROGEN
Conditions to Avoid Polymerization:EXCESSIVE HEAT/COLD
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.